Baywatch: All together now!

I want to start this post out by reviewing some of the things I am not strong enough for in pinball:
lifting a 4-player EM head on to a machine.
Lifting most heads on to a machine without the crushing fear of it being one hiccup away from smashing.
Putting the small rubbers on those damn Sega posts. Owie my fingers.
Loosening that ONE. DAMN. BOLT. (note: using rubberized gardening gloves did the trick)
Putting cold superbands on to flipper bats!
Removing a non-EM playfield from a machine.
Being the person on the bottom in getting a machine chasis up my stairs.

So many more scenarios to discover!
A million thanks to all of those who have lent their muscle over the last 2 years.

All that said, take a look!

Ahhh all working!

OK a few pitafalls:

I thought I had mucked up this part.  

Testing the game, the ball was flying off in a weird way.  Turns out the bottom screw wasn't fastening the ramp right enough.

Then, turns out the T-Nut in the playfield had raised!

After much fussing, the isuse was that I had not tightened the upper  (right) bolt properly, and that there was too much pressure being applied to the lower (left) nut, and that was drawing the t-nut from the PF.

All fixed!

The guard tower needs to get tweaked as well.   I have to set it slightly lower so that the playfield glass doesn't rub against it at all.

In initial tests the ball was not behaving well on launch.  At the post in the center, the ball had not been clasping the ramp in to the highest position, meaning the ball would slam down in to the posts.

In the photo it is fixed in to the uppermost position.

Having everything fixed makes a huge difference!  The top gate now opens perfectly.  I did not replace the coil, just cleaned the caked on soot.  Guess that was all that was needed, because it now works perfectly.

The gate on the right also works great, meaning the 3 different skill shots are now GO and shots 2 and 3 are super challenging!

The new functionality also adds a lot to the game.  The above shot means that on some Tidal Wave shots, the right gate opens then sends the ball back over the orbit right-to-left, instead of just returning it to the right flipper.

This light orbit rollover will open the upper gate, meaning a full and proper orbit shot can occur!

I have yet to explore the game in depth, but with those 2 gates properly working, the game has become even better!

Now, just a moment while we bask in the beauty of proper GI:

oh and let's just take a before and after example:

ick

cleaned and reinstalled!

Baywatch: reassembly progress!

I have been super busy and only working on this machine in fits and starts.
Each step of the way I have been hand scrubbing each plastic, wireform, screw, etc before putting it back on.  The hardcore people would be tumbling each of the metal parts and repaiting the wireforms and blowtorching the swirls from the plastics, but nuts to that, I barely have the time for this!

This is a huuuuuuge improvement over what it was!  So much brighter, so much cleaner.  I want to get this 100% back together in the next few days.

Dammit, I planned on selling this game, but if it plays that much better after this rebuild?  rrrrrrrggh might be tough to let go.  :)

Next weekend?  There might be a new thing arriving.  Just saying, I might have a beat up Target Alpha on the way!!!!!!!!
Also:  swapping out my ST:TNG playfield for 2 of my grail pieces:  Space Riders and Genie playfields!!!
Also:  swapping out the somewhat dark FreeFall backglass for a classic 60s Williams Zig Zag!
And over the holidays?  A few more marquees are on the way.  Things are all coming together.  :)

Baywatch: How to tear down the playfield!

BAYWATCH SHOPPING ORDER

1)  UPPER RIGHT WIREFORM
Start with the upper right wireform.  2 bolts to remove, then slide it out (to the right) from the lifeguard tower.  Then take the right background plastic off to allow you to move the single switch connector through.

2)  LIFEGUARD TOWER
DON'T DO WHAT I DID.  Do not start at the top and take off the plastic and try and work your way down.

DON'T DO THIS.

The lifeguard tower actually comes off quite easily:  First label and undo the 3 connectors for it under the playfield.  Then there is a bolt at the very back of the game, then 2 small screws holding the front of ramp in.  Those ramp screws are hard to get at due to the plunger wireworm in the way, but if you go at an angle, or have a long shaft screwdriver, you should be ok.
Then the whole unit lifts out!
Wow, I wish I knew that 45 minutes ago.

DO THIS.

3) PLUNGER LANE WIREFORM
Next step is the plunger lane wireform.  There is the clear plastic assembly that is easily removed, then 2 bolts beneath it.  There are two bolts mid playfield where the wireform connects as well, but the lower one required me unscrewing a flashlamp to gain access.  Then 2 connectors have to be labeled and detached at the back, then fed through the main playfield.
1 of the flashlamps has a wire that goes through the right ramp assembly, so best to just detach that lamp from the wireform because no way in hell are you getting the plug on through.
Then at the top there is one bolt now revealed by the missing lifeguard tower.  Huzzah!

At this point things might seem a bit counter-intuitive, but check the dependencies:
The Earthquake VUK wireform can't be removed since there is a bolt under the Venice Beach Ramp.
Venive Beach is stuck there until the left inlane wireform can be slid out.
Left side wireform isn't going anywhere until the cross-playfield wireform can be detached.
So that leaves us with the Iron Man / Tourist Season ramps for removal.  They are caught under the Earthquake VUK wireform, but by at least removing it's screws, it gives us strategic wiggle room!


4) IRON MAN / TOURIST SEASON RAMPS PART 1
I started by labeling disconnecting the 2 lights under the playfield, as well as the switch connector at the back of the ramp, whose wire runs through the back of the playfield.
2 screws removed at the front of each of the ramps, plus 2 screws removed at the back of the ramp by the game wall.
After that remove the sailboat plastic above the drop targets, as that presses down on the ramp plastics.
we're just going to leave it like this for now.

not a good photo, but it really highlights it's filth

5) CROSSOVER WIREFORM
Now that the upper right ramps have a bit of wiggle, we can easily slide out the right-to-left wireform that runs across the center.
There is a screw in the center, and after that it can wiggle out at the top and on the loops on the left.

goodbye, cross-playfield wireform!

6) LEFT WIREFORM
Now that the cross-playfield wireform is gone, we can remove the left wireform that dumps the ball in the left inlane.
The bolt at the slingshot is easy, but here is a ridiculous thing we now have to do:  To get to the wireform's screw in to the playfield, you have to remove the plastic piece above the shark targets.  To remove the plsatic above the sharp targets, you have to remove the wireform since a welded flasher mount is in the way.
Only way I can see doing this is coming under the flasher with some pliers and manually rotate the bolt and loosen the plastic.  Then you can rotate the plastic out of the way to gain access to the wireform's bolt!
label and disconnect the flashers beneath the playfield and the ramp should slide out.

Yeah you're not getting in to that upper crack without the plastic moved...

Technically, it was easier for me to get to since my plastic was broken. Thank goodness I found a replacement.

7) VENICE BEACH RAMP
Remove the clear plastic protector.  2 screws at the ramp entrance, as well a screw at the back left in a post that is securing it.  Label and disconnect the connector that runs through the wall at the back for the ramp switch.
Reel in horror at the fact that no one was probably been this deep in to the game before and you are fighting against 20 year of soot.

I should have wrote "wash me" with my finger.

8) EARTHQUAKE VUK WIREFORM
With the Venice Beach ramp now gone you can easily access that third bolt for the VUK wireform!  Easy!

9) IRON MAN / TOURIST SEASON RAMPS PART 2
With the Earthquake VUK wireform gone, the 2 lights and 1 switch disconnected, and all the screws removed, the last major assembly comes off!

well hello there, dirt farm!

10) the solenoids
At this point there are only 2 other major things I am looking at, the 2 on-playfield solenoids.  One in the upper right hand corner opens the gate, and one on the right opens the kicker that sends the ball on a leftward orbit.  On my game both needed major tending to.

this solenoid pulls down the metal pole

That metal pole hooks in to that metal hook and opens it up for that kick back shot.

This is the solenoid that controls the ball gate at the top right.  Oops, I needed to buy the coil inset in to the bracket!  arrrrgh

Everything else is just your typical cleaning, replacements of rubbers, putting in LEDs, and cleaning + replacing plastics.
FUN

Baywatch: getting to the grime

After the utter filth beneath the apron was discovered in my last post, a cursory examination showed a mission critical issue with the shop job:  Nothing else would ever be clean while the trough beneath the playfield was crusted in filth.
It was a common shot in the game, to enter that lifeguard tower, and each time the ball ran the distance it just pushed the dirt along and in to the game.

So no point working on the top (and testing) while this  was there.

filthy filthy filthy trough!

I thought it would be a near impossible mission, but with only unscrewing about 18 bolts, removing 2 standups, and disconnecting 1 switch, I was able to carefully work the ramp out of the harness and off the playfield without having to really disassemble things too much.

I ended up cleaned lots of that caked on blackness as well.

I wish I took a better picture, but ummm, eww.

of course it cleaned up quite nicely:

Then back in to the machine!  Played a test game and it was all good.
I decided to be eager and start the mad puzzle of tearing down the playfield.  10 minutes in?  STUCK.  Dammit.  I'm not strong enough for this one screw.  Booooo.
Will have to enlist help another time.

Baywatch: winter is coming.

Fuck daylight savings time.  Who needs this anymore?  Certainly not parents with young kids.
Welp, now that I see no sunlight, time for a project I guess?  BAYWATCH:  prepare to get shopped!

some of the many replacement bits going in to the machine!

Between parts and LEDs, almost $400 will be put in to it.  And that doesn't even include a DMD swap.


I had a bit of time tonight so decided to work on the apron area.

before!

after!

On the right hand side I could find little pockets of dirt that had obviously been cultivating since 1995.

To get the hard-to-reach areas, I find a utility tooth brush works great.  Then get a clothe in there to wipe up the dirty Novus 2 froth.

I then spent some time with a bottle of Goo-gone and a razor blade to get the old tape off of the apron metal.

And finally, I got to replace my first plastic!  This busted right inlane plastic is the most noticeable of them all.  I added 1" lexan washers to both sides as well, so here is to hoping that extends their lifespan.

note the giant chunk missing

ahhhh all fresh and spunky and protected!

Introducing... BAYWATCH!

OMG OMG OMG OMG!!!
I am soooo excited to have this here.  Back when I first got back in to pinball, Baywatch was high on my list of machines to own and here it is!
It fit 2 great criteria:  Cheap (thank you cheeseball theme!) and Awesome (thank you, expansive playfield loaded with great shots!)

The guy who lent me Beat The Clock had lent me this game as well, but I quickly realized it was not going anywhere.

I will do a huge teardown in the fall, as the game needs a deep shop job.  I have a stack of stuff coming in.
Ordered some replacements plastics from Bay Area Amusements.
Ordered a snapped wire actuator arm from Pinball Parts Australia.
Ordered an external battery holder and some metal bits from Pinball Resource.
Ordered a full rubber kit, new bottom translite trim, light brackets, replacement coil and other things from Marco Specialties.
And finally, ordered a giant bucket of LEDs from Comet Pinball.

Once assembled, I will be stripping most everything off the playfield, getting all of it working 100%, deep cleaning, moving to full LED lighting, and slowly putting it all back together.

Technical report coming LATER, but for now here is a shot of it with the head off: